Potable Water Treatment
DESCRIPTION:
Linear2
WSF-36 & WSF-20 are highly concentrated liquid linear chain polyphosphate manufactured specifically to an improved resistance to reversion or hydrolytic breakdown. This specialty phosphate is produced with a high P2O5
ratio designed to enhance the products stability. Linear2
WSF-36 & WSF-20 will form soluble, dissociated complexes with metallic ions, especially iron, calcium and magnesium, preventing scale formations and "red/black water" conditions throughout the potable water system. Linear2
WSF-36 & WSF-20 will slowly and gradually soften and remove existing scale deposits within the water system. Finally, Linear2
WSF-36 & WSF-20 will suppress both anodic and cathodic electrochemical reactions occurring on the internal surface, while depositing a non-accumulating protective coating to effectively reduce corrosion. These formulations are designed to be stable under otherwise extreme conditions of temperature, time, and where the requirements of potability must be met.
APPROVALS:
Linear2
Formula's WSF-36 & WSF-20 are officially listed with NSF International (NSF/ANSI) Standard 60 - Drinking Water Additives, with the authorization of the U. S. Environmental Protection Agency (USEPA).
CHEMICAL PROPERTIES:
APPLICATION AND DOSAGE:
Linear2 WSF-36 & WSF-20 can be applied to the water system directly out of the container and into the water system by use of a
chemical injection pump. We do not recommend dilution of either concentration. Typical treatment dosages range from 0.75 mg/l (part per million) to 12.0 mg/l
(calculated) for potable water and higher for non-potable applications. Please refer to our Dosage Calculator
for determining a general dosage recommendation for Linear2 WSF-36 & WSF-20 water treatment.
HANDLING:
Handle in accordance with good industrial hygiene and safety practices. Refer to Material Safety Data Sheets for handling information.
PACKAGING:
Linear2 WSF-36 & WSF-20 are available in 5 Gal. Pails, 30 Gal. Polyethylene Drums, and 55 Gal. Polyethylene Drums - F.O.B. Clearwater, Florida 33760
For more complete information on properties and safe handling of this material, see the
Linear2 WSF-36 or Linear2 WSF-20 Material Safety Data Sheet [MSDS]
Viewing and/or printing our Linear2 Product Data and Material Safety Data documents requires the use of ADOBE Acrobat reader. If you don't have it you can get it here:
Free download
Print Product Data
Polyphosphate-blend study:
Send mail to sper@sperchemical.com with questions or comments about this web site.
Copyright © 2000-2002 SPER Chemical Corporation
Equipment Feedback Iron and Manganese Water Treatments Potable Water Treatment Water Treatment Chemicals
Go to a product data page.......
 |
 |
 |
 |
 |
 |
