Contact us Toll Free at: 877-535-9033
|
|
|
Contact us Toll Free at: 877-535-9033 |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
Municipal Water Treatment Formulations |
||||||||||
 |
||||||||||
|
SPER Chemical Corporation manufactures the following potable water treatment blends. These products are officially certified and listed with the National Sanitation Foundation (NSF) for use in drinking water systems. All of our Municipal Water Treatment products are non-hazardous and safe to handle. We package our formulations in both granular and liquid forms. The liquid products are offered in two different concentrations in order to provide maximum injection control based on the system water flow rate. Please review the general information below that describes our various blends, and select the product name to go to the individual web page for that product. Thank you, and please call with any questions you have. |
||||||||||
|
Standard 60 Listed |
||||||||||
 |
||||||||||
 |
||||||||||
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Sequest-All is our benchmark product manufactured to provide overall stabilization including mineral sequestration, scale deposit control and corrosion inhibition. Sequest-All was designed using only high quality ingredients to work effectively in high temperature water and remain active for a longer time span. This product is best utilized in systems with pH ranges between 6.8 and 7.8 and have generally average hardness levels. Sequest-All is very effective in systems desiring corrosion inhibition to meet the USEPA Lead and Copper Rule (1991). Please review our easy to apply Sequest-All Liquids for direct injection. |
||||||||||||
|
Sequest-All EMC is a blend formulated to maximize the sequestration of mineral ions including iron, manganese, calcium, and magnesium etc. Sequest-All EMC is also a highly effective chelating treatment and cleansing treatment that will reduce mineral scale within the distribution system. This product is very effective in most pH ranges especially in alkaline conditions of 8.5 pH and higher. Sequest-All EMC is also produced in Liquid concentrations for ease of application. |
||||||||||||
|
LINEAR 2: |
||||||||||||
|
Linear2 is an extremely stable long chain polyphosphate specifically manufactured with a high P2O5 ratio for maximum resistance to reversion of polyphosphate breakdown. Linear2 has been determined to be a very effective copper corrosion inhibitor when used in systems with medium pH ranges and mineral hardness levels. Linear2 is also produced in Liquid form for quick use. |
||||||||||||
|
Protect-All is a is an orthophosphate based blended water treatment formulation used for the inhibition of internal corrosion in water distribution systems. This product is a choice blend should you desire a orthophosphate product especially with its inclusion of mineral scale dispersant ingredients to provide a base for inhibitor film formation. Protect-All is best used in systems with medium hardness levels and average pH ranges of between 7.2 - 7.6. Protect-All is also available in Liquid form. |
||||||||||||
 |
||||||||||||
|
|
|
Copyright © 2000-2010 SPER Chemical Corporation |