PROTECT-ALL Liquid Water Treatment

NSF_Mark_6-13Protect-ALL is a orthophosphate liquid blend formulated specifically to be used for the inhibition of internal corrosion in potable water distribution systems. Protect-All liquid contains cleansing ingredients necessary for the gradual removal of existing mineral scale deposits. The product includes metal phosphatizing ingredients required for the development and maintenance of corrosion protective film formation. Consider Protect-All liquid potable water treatment if you are in need of an effective corrosion inhibitor.

PROTECT-ALL Liquid Functions:

  • Protect-All is a unique orthophosphate liquid blend for effective reduction of internal corrosion in potable and non-potable water distribution systems.
  • Protect-All will suppress primarily the anodic electrochemical potential thereby neutralizing the circuit necessary to form a corrosion cell on the interior surface of the distribution pipe and equipment.
  • Along with functioning as a corrosion inhibitor, Protect-All has ingredients that will help stabilize mineral ions such as iron, calcium, magnesium and manganese preventing mineral scale deposits and discolored water complaints.
  • Once added to a water distribution system, Protect-All is also an excellent pH buffering agent to prevent swings in pH to the acidity side.
  • Protect-All wil also reduce the demand for chlorine because of the stabilization of minerals and reduction of scale deposits effectively improving disinfection throughout the water distribution system.
  • Gradual removal of exisiting mineral deposits, along with continual inhibition of existing natural minerals within the water system from developing scale deposits formations in hot water lines and residential water heaters.

PROTECT-ALL WSF-20 & WSF-36 Liquid Chemical Properties:

Properties:

WSF-20

WSF-36

Composition….

Liquid

Liquid

Bulk Density…

9.84 Lbs/Gal

11.25 Lbs/Gal

PO4% – Blended…

20%

36%

Freezing Point Temp…

-3oC (26.6oF)

-10oC (14.0oF)

Properties:

WSF-20

WSF-36

Appearance…

Clear, Blue

Clear, Blue

pH of 1% Solution…

5.6 – 5.9

5.1 – 5.4

Specific Gravity…

1.18

1.36

NSF Max Potable Dosage ..

45 mg/L (by wt)

30 mg/L (by wt)

PROTECT-ALL Liquid Application & Dosage

Protect-All blended liquid phosphate can be applied to a water system directly from the container and into the water system by use of a chemical injection metering pump. We do not recommend dilution of either concentration. Typical potable water treatment dosages range from 1.25 to 4.00 mg/L (calculated) and higher for non-potable systems.

PROTECT-ALL Liquid Packaging, Shipping and Handling:

Liquid_packaging_cluster0202Protect-All WSF-20 & WSF-36 liquid is packaged in 5 gallon pails and 30 & 55 gallon poly drums FOB Clearwater, FL 33760. The Protect-All WSF-20 & WSF-36 5 gallon pail is shipped securely using DOT packaging. The 30 and 55 gallon polyethylene drum is factory sealed with a tamper evident security cap for your protection. Please refer to our Material Safety Data Sheet for handling information:

 

MATERIAL SAFETY DATA SHEET